It is currently Sun Jul 21, 2019 8:26 pm


Standard z22se supercharged M62 3.1 pulley

Here you can post and discus calibrations which work well with your setup and ObdTuner.
  • Author
  • Message
Offline
User avatar

Chill

  • Posts: 31
  • Joined: Fri Jan 03, 2014 9:31 pm
  • Location: UK

Standard z22se supercharged M62 3.1 pulley

PostFri Jan 03, 2014 10:29 pm

- Engine: Z22SE Standard internals
- Charge cooler
- Throttlebody: 68mm
- Exhaust: 2.5 tullet with standard manifold
- Injectors: Blue VXR (470mm)
- Rev limitter: 7100
- Cooling fan switch on temperature: 98
- Map sensor: 2.0 delphi
- Air temperature sensor: OEM
- Fuel pressure regulator connected to outside: vacuum/boost
- EGR valve enabled:Disabled
- Misfire check enabled: Disabled
- Catalyst check enabled: disabled
- Main fuel speed-density
- Supercharger: M62
- Supercharger pulley size: 3.1
You do not have the required permissions to view the files attached to this post.

Return to Calibrations

Who is online

Users browsing this forum: No registered users and 1 guest

cron