It is currently Sun Jul 21, 2019 8:25 pm


Standard z22se SC M62 std. Pulley z20let injectors

Here you can post and discus calibrations which work well with your setup and ObdTuner.
  • Author
  • Message
Offline
User avatar

Speerke

Site Admin

  • Posts: 28
  • Joined: Tue Dec 31, 2013 12:09 pm
  • Location: Netherlands

Standard z22se SC M62 std. Pulley z20let injectors

PostTue Jan 14, 2014 6:38 pm

Note:
The z20let injectors are on the small site for this setup so the rpm is limited to 6500 rpm.

- Engine: Z22SE
- Supercharger: Eaton M62
- Supercharger pulley size: std. Pulley
- Throttlebody: 68 mm
- Exhaust: dBilas manifold, Miltec sportcat, Turbo backbox
- Injectors: Injector 365cc/min (Bosch 0 280 156 021)
- Rev limitter: 6500 rpm
- Cooling fan switch on temperature: 98C
- Map sensor 2.5 Bar (Bosch 0 261 230 042)
- Air temperature sensor: Bosch 0 261 230 042
- Fuel pressure regulator connected to boost
- EGR valve disabled
- Misfire check disabled
- Catalyst check disabled
- Main fuel speed density
You do not have the required permissions to view the files attached to this post.
Less Is More

Return to Calibrations

Who is online

Users browsing this forum: No registered users and 1 guest

cron